Venus GX -> NMEA2000 / Signal K

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

kim asked Feb 20, '19

Venus GX -> NMEA2000 / Signal K

I have an EasySolar 24/1600 that I'm looking to tie into my vessels sensor / monitoring network.

From reading this article it looks like the recommended approach has been to bridge both the VE.Bus connection from the internal MultiPlus and VE.Direct from the MPPT direct to N2K. In the comments section though there was talk of a CCGX -> NMEA integration. Is this still something on the horizon?

I'm assuming it will apply to the Venus GX too? If so, that would be a much neater integration (VE.Bus and VE.Direct -> Venus GX -> NMEA) as well as providing a couple of additional sensor inputs.

On a slightly related note, has there been any consideration for providing a direct Signal K interface from the Venus / CCGX?

Venus OS EasySolar All-in-One VE.Direct VE.Bus NMEA 2000 - N2K

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) answered · Feb 20, 2019 at 07:05 PM

Hello Kim! Welcome here on community.

NMEA2000: available in Venus OS since a while now, see here:

https://www.victronenergy.com/media/pg/Cerbo_GX/en/marine-mfd-integration-by-nmea2000.html#UUID-9abe39f1-45bf-255f-dde6-84d343b36135

SignalK: more than plans: image including SignalK is available for both Venus Gx and Raspberrypi.

https://github.com/SignalK/signalk-server-node/issues/517

EDITED 2020-04-24: replaced the "nmea2000-out is coming" text by a link to the manual since its now actually here.

4

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kim commented · Feb 22, 2019 at 02:24 AM

That's awesome. Looks like I'll be picking up a Venus GX then.

0 ·

mrt commented · Feb 23, 2019 at 12:05 AM

Looking forward to that release - I have an NMEA2000 network port installed near my Venus waiting for it ...

0 ·

sebastian-w commented · May 15, 2019 at 08:14 PM

@mvader (Victron Energy Staff): Is there any ETA for the release?

0 ·

mvader (Victron Energy) ♦♦ sebastian-w commented · May 26, 2019 at 05:39 PM

No, sorry.

0 ·

Modifications Space

Node Red Space

Answer 1 · 2019-09-12T07:43:23Z

bora answered · Sep 12, 2019 at 07:43 AM

Any further news on the NMEA integration?@mvader (Victron Energy Staff) It would be great if the Venus gx could take the position and wind info from the NMEA network and share it via the VRM/internet.

I’m using WilhelmSK app to remote monitor my power on the boat.

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) ♦♦ commented · Sep 12, 2019 at 08:48 PM

Hi Bora, yes; we've finished adding the transmission of battery monitor frames out on to N2K; which will be available as in Venus OS v2.40 release candidate soon. One, (maybe two) weeks from.

What we did not do is add reading wind or other data; next on the list is sending out inverter/charger data on N2K, thereafter perhaps solar chargers and inverters and battery chargers... and then we can look at reading other data. So I'm afraid that will take quite some more time.

0 ·

Answer 2 · 2019-12-02T13:32:43Z

jurjenhoekstra answered · Dec 02, 2019 at 01:32 PM

@mvader (Victron Energy Staff) I am really interested in further integration of NMEA2000 into the GX. Full integration would make it a real communication centre for the Victron equipment. You could also get rid of your VE-Bus-NMEA2000 interface for a Multi/Quattro en VE-Direct-NMEA2000 interface for the BMV once the GX starts transmitting the correct PGNs. I read that in september there was an indication of a new firmware within 1-2 weeks, but I do not see it listed yet on the firmware page. Any news?

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) ♦♦ commented · Dec 02, 2019 at 01:48 PM

Hi yes there is news: the current beta (v2.40~something) contains the NMEA out function for battery monitors as well as inverter/chargers.

and then yes we can finally get rid of those converters!

0 ·

Answer 3 · 2020-02-16T13:06:01Z

Greg Ireland answered · Feb 16, 2020 at 01:06 PM

@mvader (Victron Energy Staff) Hi, are you able to provide more detail on the capabilities of the N2K connectivity. In a seperate post in the Venus OS heading, I have detailed my experience and whilst I can see some data from the Quattro and cannot see any messages from the 712 battery monitor I have installed. I am super keen to get this info onto my N2K display.

https://community.victronenergy.com/questions/40430/venus-gx-242-can-bus-connection-what-can-we-see.html

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 4 · 2020-03-21T14:58:30Z

bora answered · Mar 21, 2020 at 02:58 PM

Any further updates on reading the NMEA network outputs like wind/position/depth etc and showing it on the VRM?

I have a 4G router and an iKommunicate Signal K box but the shore server that the data goes to isn't as reliable as the VRM so I can rarely see the data.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 5 · 2020-04-24T18:31:08Z

mvader (Victron Energy) answered · Apr 24, 2020 at 06:31 PM

hi all, I came across this old thread looking for something else. Just to update you: we do have NMEA2000-out functionality in Venus OS now. Here is the manual: https://www.victronenergy.com/media/pg/Cerbo_GX/en/marine-mfd-integration-by-nmea2000.html#UUID-9abe39f1-45bf-255f-dde6-84d343b36135

And in the next big release, we're adding more. Lots of things around tank level monitoring, including NMEA2000-out function. As well as being able to read GPS data from NMEA2000. For more info on that, see the v2.60 posts. v2.60~16 is the last one at the moment.

All the best, Matthijs

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question

Venus GX -> NMEA2000 / Signal K

Related Resources

question details

Modifications Space

Node Red Space

question

Venus GX -> NMEA2000 / Signal K

Related Resources

question details

Related Questions

Modifications Space

Node Red Space