question

wolle4000 avatar image
wolle4000 asked

AUX1 at Victron Quattro

I want to use my AUX1 from my Victron Quattro to disable charging with an assistent( charge current control assistant ).

Do I have to connect the two wires of the AUX1 to switch it on or off.

or can I give also 12V to the AUX1 to switch it on or off ?



MultiPlus Quattro Inverter Charger
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

Connect the wires to turn it on or off.
Please do not put 12V up it.

4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

wolle4000 avatar image wolle4000 commented ·
then I will need a 12V relay ?
0 Likes 0 ·
wkirby avatar image wkirby ♦♦ wolle4000 commented ·
If your source signal is 12V then yes, a relay would work.

Alternatively, you could use an optocoupler, solid state and perhaps more elegant.

0 Likes 0 ·
Show more comments