
I have a bank of four Victron solar panels connected to a 150/70 MPPT.
Sometimes it charges fine then a few minutes later it stops but still shows voltage
By switching off the main breaker between panels and MPPT and back on again the panels start charging, 30A+ but then stop again after a while. Is there a setting I’m missing somewhere?
Many thanks
Alex
I have 4x Victron 100Ah smart LiFePO4. I also have a Cerbo GX, Multiplus 12/3000/120 and a BMS and a TR smart DC/DC charger for the engine alternator.