This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Victron 24-3000-70 testing for an off grid system. Was running a 1,700watt space heater to test. Battery is lifepo4 280ah had 253 ah SOC. Voltage was 25.8 under load. Shut down and low volt light lit up then after about 30 seconds it restarted and ran for another 15 min before I stopped test. Battery rebounded to 26.6 without load but SCC on with 14a in.
What is cause? What to do?
This should be in question and answer section.
What battery is it? What are its discharge specs?
What BMS is it using and is it connected - you could check stats via the GX (assuming you have one) - is it logging any faults?
