Hi Victron Community,
We have a Multiplus II on a Freedom Won Lithium Battery. We have an active AC supply from our energy company. We run a multitude of hardware on this Multiplus II. Average load is around 1000W. When we lose AC supply most of our hardware is unaffected by the switch from AC to battery. But our servers and some other odd devices (like speakers, UPSs and PC screens) reset.
This is obviously not good. It is damaging the servers as well as causing downtime which the Multiplus II + battery was supposed to prevent.
So by my deduction I am assuming the Inverter is off while there is AC input and as soon as it switches to Inverter there is a delay which is tripping the hardware. Do I perhaps have a setting somewhere that should prevent this? Could someone perhaps give me an idea where to look for a solution to my problem?
Thanks in advance!
D.
