This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello I saw that there are inverters for three-phase current up to 50/100/200 kw. And they accept a battery voltage of 300/400 volts.
However, I have noticed that there are no mppt controllers capable of charging 400 volt battery banks.
I wonder, is it possible to connect many 48v mppts in series to a 480 volt bank?
I also saw that victronenergy does not produce inverters over 5kw it seems to me.
Is it possible to combine several 5 kw inverters in parallel to obtain 30/50/100 kw output?
Victron inverters range up to 15kVA, you can parallel four of these per phase for a 180kVA 3-phase system.
You can parallel more of the smaller inverters, except the 8 and 10kva multi 2's which don't support it.
Its all on the product pages.
No you can't series mppt's.
You sure about a 300V DC bank?
Thanks you. Is not for me. It's to learn and understand. And for an ipothetic 70kwh solar system of a person that need to run a industrial machine and industrial fridge cell with 35 kw power. But nothing real in a short time.
Now, I noticed that exists some chinese mppt to charge 480v battery bank with 120kw output.
And some pwm controller to charge also 480v battery bank with until 120kw output.
But these pwm controller accept only 50v Pv input.
Is possible that a pwm controller increase 50v Pv to 480v battery output? 120kw with 50v Pv are a monster current of 2400 amperes. How to manage these DC current level on wiring?
@.francesco
Now, I noticed that exists some chinese mppt to charge 480v battery bank with 120kw output.
And some pwm controller to charge also 480v battery bank with until 120kw output.
But these pwm controller accept only 50v Pv input.
Post some links to the above products.
