question

mojimoji avatar image
mojimoji asked

how to use the motion sensor

After reading this article :

I would like to know HOW COULD I USE THE MOTION SENSOR?

Digital Multi Controlsensorhowto
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Lucian Popescu (Victron Energy Staff) avatar image
Lucian Popescu (Victron Energy Staff) answered ·

Hi, Ruuvi devices that are supported already, are sending XYZ acceleration data. If you are using the latest large Venus OS, you can see that data in Node Red

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

paros avatar image
paros answered ·

Is it possible to make the motion sensor from Ruuvitag visible in VRM?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Lucian Popescu (Victron Energy Staff) avatar image Lucian Popescu (Victron Energy Staff) ♦♦ commented ·
Not directly in VRM, but it can be visible in a node red dashboard, that can be accessed through VRM
0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic