I initially set the charging current at 20 amps (240 volt) but was only getting about 1600 watt going into the batteries from my 10 kva generator. I changed it to 30 amps using the dip switches but it only increased to about 2000 watt so I then went up to the max 50 amp and it has stayed the same. The charging current is set at 100%. Is there something else that I need to do to get up towards 5000 watts going into the batteries. I would like to get the load on the generator up a bit.
I hope someone can help me in a simplistic way, I am comfortable using the dip switches. Thanking you, Ken