Good morning to everyone!
In an off-grid 24volt system, I have installed an EasySolar-II 3kva MPPT250 / 70 GX, 2kWp pv panels and 535Ah OPzV batteries. I have the following problems:
1. The SOC constantly seems to falls, the pv panels do not seem to charge the batteries sufficiently, although it is shiny days and the ac loads are very low (25W-70W). I think showing SOC is fake. I suspect this is because the battery monitor is made by the embedded multiplus and not by the MPPT solar charger. True? How can I change that?
2. The Virtual Switch does not work. I have made all the settings but the NO or NC contacts do not change status when the battery conditions are met.
3. I cant find at remote console the relay menu
Thank you all in advance.