This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi community!
My first question on here so go easy on me. I’m setting up a system and looking at the EasySolar 24/3000/70/50 MPPT 150/70
What would be the best solar panels to go for? 12v or 24v? As the open circuit voltage on the mppt can be up to 150v could I run 2x 24v panels in series to the mppt with a voc of 40v per panel?
Thanks in advance
Victron have a nice online mppt configurator tool.
Look at putting about 2400w (or so) of panels on the mppt.
Also consider battery size. You don't want to be pushing 70A through a small battery bank. Same goes for power output. At full output you'll be pulling 120A or more.
