Im after some help as I am at a loss with this one. Yesterday I wanted to make a change to the VE configure settings by remotly download the file as i normally do but on this occasion, the option to download the file was missing. On reading up simular issues, it indicated to a required firmware upgrade required of which I carried out. Once I did the firmware upgrade, I made my change to the float voltage down a little, saved the file and uploaded the file. Then I noticed ESS would not work. The batteries were at or near 100% and as it was the evening, I was expecting the inverter to be running meeting my AC out load but all it would do was to keep charging in bulk, absorption or float.
The only way I could get the Multiplus to invert was to manually out it in 'invert' mode, not 'On' of which it disconnected the AC in as you would expect. I have reloaded the VE configure setting several time, tried making changes to the setting in the remote console but still it will not invert in ESS mode. Ive tried reading very forum post I can with similar issues but no luck with any suggestions.
EV config setting below / attached.
Any help greatly appreciated as currently I have a ESS system doing noting. I have the Multiplus 2 5kVa GX version.
