clock frequency VE.CAN

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

stanhausc asked May 5, '22

Hi!

I'm trying to communicate through the VE.CAN port of the CERBO GX using a PCAN-USB and Ubuntu or PEAK's own software (PCAN-View).

I made the cable using the following references:

By Linux I can communicate and receive the message, and it arrives at the Peak PCAN-USB converter, you can see, because the led flashes differently:

The only configuration difference is the clock frequency, see the Cerbo configurations:

Am I doing something wrong?

Is the error due to clock frequency? is it possible to change it? (from PEAK-USB is fixed)

what is the meaning of this passive error? (picture below)

best regards.

Cristian.

cerbo gx VE.Can

settings.png (72.8 KiB)

1651762637232.png (77.3 KiB)

pinagem.png (18.7 KiB)

captura-de-tela-de-2022-05-02-16-31-18.png (39.4 KiB)

pcancerbo.png (11.4 KiB)

errocerbo.png (19.8 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2022-05-05T15:32:49Z

bathnm answered · May 05, 2022 at 03:32 PM

Have you tried using candump, to see what is being received?

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

stanhausc commented · May 09, 2022 at 05:40 PM

Yes I used candump but I don't get any data.

0 ·