Hi!
I'm trying to communicate through the VE.CAN port of the CERBO GX using a PCAN-USB and Ubuntu or PEAK's own software (PCAN-View).
I made the cable using the following references:
By Linux I can communicate and receive the message, and it arrives at the Peak PCAN-USB converter, you can see, because the led flashes differently:
The only configuration difference is the clock frequency, see the Cerbo configurations:
Am I doing something wrong?
Is the error due to clock frequency? is it possible to change it? (from PEAK-USB is fixed)
what is the meaning of this passive error? (picture below)
best regards.
Cristian.