I am running 2 Multiplus II 48/5000 in parallel and am experiencing a power imbalance whilst charging and discharging, The master unit is a Multiplus II 48/5000 GX (PN: PMP482506000) and the slave is a Multiplus II 48/5000 (PN: PMP482505010) All wiring is of identical lengths of 35mm to a Victron Lynx distributer then to 7 Pylontech US3000C batteries) Charge current is limited to 60A in the master. I would expect charge current to be 120A however when charging I am seeing 60A from the Master and only 45 from the slave. During discharge the imbalance is of the same ratio. The GX has a HW label of Rev2 however the standard multi doesn't have the same info. I have attached some photos and my configuration. I have read through the parallel system documentation and also completed the training, any advice would be gratefullyLynx.jpgMaster.jpgSlave.jpg0281bef3c77a_inst_ttyS3_Interfaces_Mk2_Tunnel (3).zip received.
Barry