question

bob-pugh avatar image
bob-pugh asked

Victron Energy Interface MK3-USB MultiPlus Compact 12/1600/70

Hi, I'm trying to connect to a MultiPlus Compact 12/1600/70 in an easy solar (2017 purchase) with a Mk3 USB dongle. Scan is not finding the device, windows 10 drivers installed and no errors on laptop.

Serial Numbers CEP 121621000 / hq1645za2t7

Chip sticker 2606154.VFD Power Pack FDP8896

I have tried both ports and a selection of ethernet cables but no luck.

Is my firmware too old or is my MK3-USB doa or am I missing something?

EasySolar All-in-OneMK3
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany avatar image kevgermany ♦♦ commented ·

Did you install VE Config software?

0 Likes 0 ·
Show more comments
3 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

Version 3.3 is more than 4 years old.
You need to download from the very first link.

https://www.victronenergy.com/support-and-downloads/software

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image
klim8skeptic answered ·

Make sure that you are using an on board usb port, and not via an USB hub..

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bob-pugh avatar image bob-pugh commented ·
Straight into port on laptop, I did try two seperate USB ports. I will try my other laptop just in case but not had a problem with this one on anythig else.
0 Likes 0 ·
bob-pugh avatar image
bob-pugh answered ·

Thanks Matthias,

with the latest version I can see the inverter (greyed out). I just need to update the firmware to be able to manage it which should be fine.

Many thanks

Bob

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

EasySolar 1600 product page

EasySolar-II GX 3000 & 5000 product page

Additional resources still need to be added for this topic