This has been seen before, about a year ago, but has cropped up again.
At the beginning of March 2022 I updated the Batrium firmware and the charge/discharge values disappeared from the VRM. A few days ago in the Color GX I switched the battery monitor from the Batrium to the BMV and the values have started to log again.
So the obvious problem is a change to the Batrium firmware. However I may have updated the Colr GX to the latest s/w around the same time.
And the Batrium appears to be spitting out the kWh in and kWh out values
This is a snapshot of the values the Batrium spits out as UDP messages on the WiFi. I can't verify what/if the data to sent over the CAN Bus or how they are tagged.
Thanks in advance
Colin