question

dc4me avatar image
dc4me asked

Charging too much?

I have a Victron Orion-Tr smart Isolated DC-DC 12/12 V 18 A charger. I see that is charges as high as 21 amps. Is this normal? Also in the settings I cannot set Absorption below 1 hr. Is that normal?

battery charging
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
kevgermany avatar image
kevgermany answered ·

They can go over the rated amperage for short periods. You should also consider power.

Yes min absorption is 1 hour.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Stefanie (Victron Energy Staff) avatar image Stefanie (Victron Energy Staff) ♦♦ commented ·

@DC4me

VictronConnect v5.59 contains a new firmware (v1.08) for the Orion smart which allows for minimum absorption time 0h when fixed absorption time is selected or 30 minutes with adaptive absorption time selected.

Make sure you have VictronConnect up to date and then the new firmware should install on your Orion smart up on next connection.

0 Likes 0 ·
Show more comments