Hello community,
I have a question concerning the CAN communication between my RPI Running Venus 2.85 with the Waveshare RS485/CAN HAT connected via CANbus to my Seplos BMS.
Via "/data/VeCanSetup/setup"
I installed the #9 Waveshare CAN
can0 Waveshare Hat 12 MHz crystal
can1 Waveshare Hat 12 MHz crystal
The i see the CAn Bus in the Venus software
But i get the ERROR-Passive failure.
In the Seplos Software i choose "Victron under CAN Protiocol"
I have double checked the wiring and measured the wires but still the same isse.
Hope you can help me.
Thank you!
Best Regards,
Dominik