This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have an MP pt-70 5-15 controller I switched my iPhone so it'll longer pair with this phone it says the smart solar would like to pair with your iPhone enter the code shown on Smart solar I don't know where I would get that information does anybody know where I get the code to redo this so I can pair it up thank
The default code is 000000.
Hi,
Although the iPhone asks for a code that is shown, you should just fill in the PIN code that is set on the SmartSolar. When you never changed the pin code, it should still be "0000000", otherwise the pin code that you changed it to. When you can't remember the pin code, you can reset it to "000000" using the PUK code and the procedure described here: https://ve3.nl/VictronConnect_ResetPIN
Kind regards,
Thiemo van Engelen
Its not like a pair of headphones or a speaker.
You dont manually pair your phone with the solar controller.
Open the Victron app and let it search for your device.
Then it will ask for your code. 000000
