question

chrisryan43 avatar image
chrisryan43 asked

Remote VEConfigure not enabled

I have two way communication enabled on my pi (running VenusOS V2.85). All working correctly with remote console and even remote firmware update but i dont have the option for VEConfigure. Any ideas?

VEConfigure 3
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
nickdb avatar image
nickdb answered ·
remote veconfigure is for changing inverter settings. If you want to tweak mppt's, as already mentioned, Victron connect does that. Just use the VRM tab instead of the local tab, and connect to your site devices from there.
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

chrisryan43 avatar image chrisryan43 commented ·
I cant believe it's that simple! Thank you so much! I never noticed the 'Devices' tab in the VRM section of Victron Connect!
0 Likes 0 ·
lifeingalicia avatar image
lifeingalicia answered ·

I think VE configure 3 is only availble for win - to configure without mk3

12 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

chrisryan43 avatar image chrisryan43 commented ·
Sorry I don't understand what you mean. I am trying to use Remote VEConfigure through VRM
0 Likes 0 ·
Paul B avatar image Paul B chrisryan43 commented ·
are you using a mac or PC as it will only work with a PC
0 Likes 0 ·
chrisryan43 avatar image chrisryan43 Paul B commented ·
I'm using a PC
0 Likes 0 ·
Paul B avatar image Paul B chrisryan43 commented ·

You have to install ve configure software on your PC

https://www.victronenergy.com/support-and-downloads/software

then you can open the setup files after they are downloaded


0 Likes 0 ·
Show more comments