question

llowalong-farm avatar image
llowalong-farm asked

Multiplus2 GX startup

Hi

We have just installed our MP2 GX inverter. Switching on we get the Victron welcome. Then Status Invert then ACdisconnected +6w. The AC1 is connected via a sub board with CB to a power outlet. Is there something we have not done to get the AC flowing.

Thanks in advance

multiple inverters
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·
@Llowalong Farm

Do you have a battery connected? Does it power up from the battery alone?

Has it been programmed at all? The base program is Virtual switch which has an ac ignore bias.

0 Likes 0 ·
Show more comments
2 Answers
llowalong-farm avatar image
llowalong-farm answered ·
Haven’t programmed it at all.

Rob

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·
Program your battery specifics before connecting to charger sources. Or in the case of the mppt program that
0 Likes 0 ·
knownot avatar image
knownot answered ·

AC disconnected means ac input - not sure if that was clear.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic