question

Andre avatar image
Andre asked

How to disable temperature compensation at Multiplus 12/3000/120-16 230

Hi,

I cannot find this topic at the programming software.

Is is a solution just to disconnect the temperature sensor?

Andre

multiplus ve.bus
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Alexandra avatar image
Alexandra answered ·

@Andre

The type of battery chosen in charger tab of the config will be where the temp compensation is set up. If you choose a lithium profile and tweak the voltages, there will be no temp compensation in the charge algorithm.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany avatar image kevgermany ♦♦ commented ·
Your BMS should cut charging if the battery overheats or temperatures are low enough that charging should be disabled.
0 Likes 0 ·
Andre avatar image
Andre answered ·

The I do not need to install the sensor for LiFePo4 charging, right?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·
@Andre

No you do not need to do so for charging purposes.


0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic