question

dereppsteiner avatar image
dereppsteiner asked

Gas Level Sensor

Hello,
is there a sensor for monitoring the gas level and for connecting to the cerbo GX?
it would be nice if this sensor is also shown on the touch gx, just like tank sensors
cerbo gx
1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany avatar image kevgermany ♦♦ commented ·
Tank level or for leak detection? And do you mean gasoline or light etc?
0 Likes 0 ·
4 Answers
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

@dereppsteiner @Daniele Calabrese

If you are looking for an LPG sensor, consider the Mopeka Pro Check LPG Bluetooth sensor that works with the Cerbo GX, wireless.

https://www.mopekaiot.com/product/mopeka-pro-sonar-tank-monitor


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Daniele Calabrese avatar image
Daniele Calabrese answered ·

Perfect exactly what I was looking for

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Daniele Calabrese avatar image
Daniele Calabrese answered ·

Any sensor to connect to cerbo to measure cooking tank tank %?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Daniele Calabrese avatar image
Daniele Calabrese answered ·

woudl this one work? it is easier to get from china in thailand than from america to thailand and also less expensive


https://www.thincke.com/tank-remote-monitoring-solutions/gas-cylinder-level-remote-monitoring/

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Only the Mopeka Bluetooth LPG sensor linked above is supported by VenusOS.

0 Likes 0 ·
Daniele Calabrese avatar image Daniele Calabrese Stefanie (Victron Energy Staff) ♦♦ commented ·
Ok i Will get that then
0 Likes 0 ·