This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello everyone,
could you please confirm that a system with Multiplus 48/5000 and Pylontech US3000C I do not need a SmartShunt in order to read the SOC of the battery pack?
Via CAN the internal Pylontech BMS will send this detail to my Cerbo, right?
Reference: https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom
Many thanks,
Mike
It is not mandatory to have a SmartShunt in the setup. With the Victron VE.Can cable from your BMS to the Cerbo GX, details of your Pylontech Battery will be displayed which you can see. To name a few, State of Charge, State of Health Lowest Voltage, Highest Voltage, etc. Pylontech's BMS will feed all this data to the Cerbo GX.
