question

Great. Super simple and it works!

Controlling the maximum would be great.

One more question: if i want to add some custom parameters like "minCurernt", how can i do this?

I need this for my automation.

Does someone install this directly on Multiplus-II GX? As this device is missing CONFIGPARSER from python. I tried everything to install it, but didn't succeed.

Any help is much appreciated, as so many of those nice add-on are based on the same software, and all require it.

Is it possible to add more than one charger? and how do I do it?

Up to now I'm using openwb for the go-e (openwb can read victron information) as we have two devices (one more will come in April)
using more devices with victron directly would be supercool!

@vikt0rm Is there any chance the AUTO mode will ever be implemented? Even though I'm sure it really is what I expect it to be: A mode that controls charge current based on total power (PV) input and battery charge mode.

Hi, I've now installed the dbus script and I already can see the go-e in my VRM surface, but it won't update the status. So my status field doesn't say "disconnected" like in the upper picture, instead this field stays completely empty. Can somebody help me with this issue?

The total energy is updated if I have charged my EV and reboot the system, but it seems like all other data is not transmitted.

Thanks,

Rudi

Installed it, and works quite fine :) Thanks for that.
But I have a UI problem:

"EV Ladestation" is my Go-e charger and connected to "Kritische Lasten", but it isn't. It is a normally connected to our house grid. Any solution to solve that?

Hello everyone,
I'm having trouble connecting the Go E Charger. Can someone provide me with a finished script? or a detailed guide to insert it?

enable the apis on the go-echarger, set the ip in you ini file, done.

Hi Community,

seems that my Logfile is full of Temperatur foults. Ini file is correct updated and works

Did somebody have the same foults?

KeyError: 'tmp'

2023-08-19 15:19:32,408 root CRITICAL Error at _update

Traceback (most recent call last):

File "/data/dbus-goecharger/dbus-goecharger.py", line 189, in _update

self._dbusservice['/MCU/Temperature'] = int(data['tmp'])

Thanks Chris

Hi Dierk,

sorry for my late Answer.

I Updatet the newer ini File but the Same Problem like before. Also i changed the the .ini in V3.

File "/data/dbus-goecharger/dbus-goecharger.py", line 189, in _update

self._dbusservice['/MCU/Temperature'] = int(data['tmp'])

The Go e Charger V4 Status:

{"version":"B","tme":"0409231303","rbc":"82","rbt":"892567374","car":"1","amx":"0","amp":"8","err":"0","ast":"1","alw":"0","stp":"0","cbl":"0","pha":"56","fsp":"0","dws":"0","dwo":"180","adi":"1","uby":"0","eto":"351","wst":"3","fwv":"055.7","nrg":[227.23,228.47,230.02,1.55,0,0,0,0,0,0,0,0,0,0,0,0],"sse":"******","wss":"******","wke":"********","wen":"1","cdi":"0","tof":"101","tds":"1","lbr":"255","aho":"0","afi":"6","azo":"222","ama":"16","al1":"6","al2":"8","al3":"9","al4":"10","al5":"16","cid":"255","cch":"16711680","cfi":"65280","lse":"1","ust":"0","wak":"********","r1x":"2","dto":"0","nmo":"0","sch":"AAAAAAAAAAAAAAAA","sdp":"0","eca":"0","ecr":"0","ecd":"0","ec4":"0","ec5":"0","ec6":"0","ec7":"0","ec8":"0","ec9":"0","ec1":"0","rca":"1","rcr":"","rcd":"","rc4":"","rc5":"","rc6":"","rc7":"","rc8":"","rc9":"","rc1":"","rna":"********","rnm":"n/a","rne":"n/a","rn4":"n/a","rn5":"n/a","rn6":"n/a","rn7":"n/a","rn8":"n/a","rn9":"n/a","rn1":"n/a","loe":0,"lot":32,"lom":6,"lop":50,"log":"","lof":0,"loa":0,"lch":0}

Thanks a lot

Chris

Hi all :)

I changed personally some stuff in the script to test out how the system behaves in the different MODES.

So where is the control logic in this setup that changes the charging Amperage.

Reason for that is:
I want to be able to set it either on automatic, so the charging and power and start/stop of the charging should do everything without user interaction or to set it to manual and start/stop and change power manually.

After some testing in Automatic:
The logic is clearly NOT in the cerbo but in the charger.

At least for the official one.

So i changed the script to have the mode parameter modifyable (for now: auto and manual) and haveing some node red flows for starting and stopping and changeing the power.

Charging 2 Renault Zoes with this setup with up to 11kW in a 3 phase setup for quite a while now and works like a charm without depleting the battery.
The Zoe is kind of special when it comes to starting stopping and needs quite some attention to prevent the red nose of "i dont wanna charge".

If wanted i can add some more details here but i dont wanna highjack this thread for a different purpose.....

Kind regards,

Dierk

@Dierk Grossfeld

Hallo,

ich habe eine Heidelberg Wallbox mit WBEC.https://github.com/steff393/wbec

Ich habe um die im Victron Portal zu sehen, den Go-E Charger in Victron implementiert gemäß dieser Anleitung hier => https://community.victronenergy.com/questions/181804/victron-cerbo-via-modbus-mit-einer-heidelberg-wall.html

Das hat auch funktioniert wie man hier sehen kann, allerdings habe ich dasselbe Problem wie der User Naiki,nämlich dass die EV Charging Station in der graphischen Darstellung an den Critical Loads hängt. Es müsste links an Grid/PV Inverter/ACLoads also an AC_in dranhängen.

Es wurde ja erklärt man müsse die Codezeile

self._dbusservice.add_path('/Position', 0) in dbus-goecharger.py ändern aber diese Zeile gibt es im aktuellen Code nicht.

#!/usr/bin/env python
 
# import normal packages
import platform 
import logging
import sys
import os
import sys
if sys.version_info.major == 2:
    import gobject
else:
    from gi.repository import GLib as gobject
import sys
import time
import requests # for http GET
import configparser # for config/ini file
 
# our own packages from victron
sys.path.insert(1, os.path.join(os.path.dirname(__file__), '/opt/victronenergy/dbus-systemcalc-py/ext/velib_python'))
from vedbus import VeDbusService


class DbusGoeChargerService:
  def __init__(self, servicename, paths, productname='go-eCharger', connection='go-eCharger HTTP JSON service'):
    config = self._getConfig()
    deviceinstance = int(config['DEFAULT']['Deviceinstance'])
    hardwareVersion = int(config['DEFAULT']['HardwareVersion'])

    self._dbusservice = VeDbusService("{}.http_{:02d}".format(servicename, deviceinstance))
    self._paths = paths
    
    logging.debug("%s /DeviceInstance = %d" % (servicename, deviceinstance))
    
    paths_wo_unit = [
      '/Status',  # value 'car' 1: charging station ready, no vehicle 2: vehicle loads 3: Waiting for vehicle 4: Charge finished, vehicle still connected
      '/Mode'
    ]
    
    #get data from go-eCharger
    data = self._getGoeChargerData()

    # Create the management objects, as specified in the ccgx dbus-api document
    self._dbusservice.add_path('/Mgmt/ProcessName', __file__)
    self._dbusservice.add_path('/Mgmt/ProcessVersion', 'Unkown version, and running on Python ' + platform.python_version())
    self._dbusservice.add_path('/Mgmt/Connection', connection)
    
    # Create the mandatory objects
    self._dbusservice.add_path('/DeviceInstance', deviceinstance)
    self._dbusservice.add_path('/ProductId', 0xFFFF) # 
    self._dbusservice.add_path('/ProductName', productname)
    self._dbusservice.add_path('/CustomName', productname)    
    if data:
       self._dbusservice.add_path('/FirmwareVersion', int(data['fwv'].replace('.', '')))
       self._dbusservice.add_path('/Serial', data['sse'])
    self._dbusservice.add_path('/HardwareVersion', hardwareVersion)
    self._dbusservice.add_path('/Connected', 1)
    self._dbusservice.add_path('/UpdateIndex', 0)
    
    # add paths without units
    for path in paths_wo_unit:
      self._dbusservice.add_path(path, None)
    
    # add path values to dbus
    for path, settings in self._paths.items():
      self._dbusservice.add_path(
        path, settings['initial'], gettextcallback=settings['textformat'], writeable=True, onchangecallback=self._handlechangedvalue)

    # last update
    self._lastUpdate = 0
    
    # charging time in float
    self._chargingTime = 0.0

    # add _update function 'timer'
    gobject.timeout_add(250, self._update) # pause 250ms before the next request
    
    # add _signOfLife 'timer' to get feedback in log every 5minutes
    gobject.timeout_add(self._getSignOfLifeInterval()*60*1000, self._signOfLife)
 
  def _getConfig(self):
    config = configparser.ConfigParser()
    config.read("%s/config.ini" % (os.path.dirname(os.path.realpath(__file__))))
    return config
 
 
  def _getSignOfLifeInterval(self):
    config = self._getConfig()
    value = config['DEFAULT']['SignOfLifeLog']
    
    if not value: 
        value = 0
    
    return int(value)
  
  
  def _getGoeChargerStatusUrl(self):
    config = self._getConfig()
    accessType = config['DEFAULT']['AccessType']
    
    if accessType == 'OnPremise': 
        URL = "http://%s/status" % (config['ONPREMISE']['Host'])
    else:
        raise ValueError("AccessType %s is not supported" % (config['DEFAULT']['AccessType']))
    
    return URL
  
  def _getGoeChargerMqttPayloadUrl(self, parameter, value):
    config = self._getConfig()
    accessType = config['DEFAULT']['AccessType']
    
    if accessType == 'OnPremise': 
        URL = "http://%s/mqtt?payload=%s=%s" % (config['ONPREMISE']['Host'], parameter, value)
    else:
        raise ValueError("AccessType %s is not supported" % (config['DEFAULT']['AccessType']))
    
    return URL
  
  def _setGoeChargerValue(self, parameter, value):
    URL = self._getGoeChargerMqttPayloadUrl(parameter, str(value))
    request_data = requests.get(url = URL)
    
    # check for response
    if not request_data:
      raise ConnectionError("No response from go-eCharger - %s" % (URL))
    
    json_data = request_data.json()
    
    # check for Json
    if not json_data:
        raise ValueError("Converting response to JSON failed")
    
    if json_data[parameter] == str(value):
      return True
    else:
      logging.warning("go-eCharger parameter %s not set to %s" % (parameter, str(value)))
      return False
    
 
  def _getGoeChargerData(self):
    URL = self._getGoeChargerStatusUrl()
    try:
       request_data = requests.get(url = URL, timeout=5)
    except Exception:
       return None
    
    # check for response
    if not request_data:
        raise ConnectionError("No response from go-eCharger - %s" % (URL))
    
    json_data = request_data.json()     
    
    # check for Json
    if not json_data:
        raise ValueError("Converting response to JSON failed")
    
    
    return json_data
 
 
  def _signOfLife(self):
    logging.info("--- Start: sign of life ---")
    logging.info("Last _update() call: %s" % (self._lastUpdate))
    logging.info("Last '/Ac/Power': %s" % (self._dbusservice['/Ac/Power']))
    logging.info("--- End: sign of life ---")
    return True
 
  def _update(self):   
    try:
       #get data from go-eCharger
       data = self._getGoeChargerData()
       
       if data is not None:
          #send data to DBus
          self._dbusservice['/Ac/L1/Power'] = int(data['nrg'][7] * 0.1 * 1000)
          self._dbusservice['/Ac/L2/Power'] = int(data['nrg'][8] * 0.1 * 1000)
          self._dbusservice['/Ac/L3/Power'] = int(data['nrg'][9] * 0.1 * 1000)
          self._dbusservice['/Ac/Power'] = int(data['nrg'][11] * 0.01 * 1000)
          self._dbusservice['/Ac/Voltage'] = int(data['nrg'][0])
          self._dbusservice['/Current'] = max(data['nrg'][4] * 0.1, data['nrg'][5] * 0.1, data['nrg'][6] * 0.1)
          self._dbusservice['/Ac/Energy/Forward'] = int(float(data['eto']) / 10.0)
          
          self._dbusservice['/StartStop'] = int(data['alw'])
          self._dbusservice['/SetCurrent'] = int(data['amp'])
          self._dbusservice['/MaxCurrent'] = int(data['ama']) 
          
          # update chargingTime, increment charge time only on active charging (2), reset when no car connected (1)
          timeDelta = time.time() - self._lastUpdate
          if int(data['car']) == 2 and self._lastUpdate > 0:  # vehicle loads
            self._chargingTime += timeDelta
          elif int(data['car']) == 1:  # charging station ready, no vehicle
            self._chargingTime = 0
          self._dbusservice['/ChargingTime'] = int(self._chargingTime)

          self._dbusservice['/Mode'] = 0  # Manual, no control
          
          config = self._getConfig()
          hardwareVersion = int(config['DEFAULT']['HardwareVersion'])
          if hardwareVersion == 3:
            self._dbusservice['/MCU/Temperature'] = int(data['tma'][0])
          else:
            self._dbusservice['/MCU/Temperature'] = int(data['tmp'])

          # value 'car' 1: charging station ready, no vehicle 2: vehicle loads 3: Waiting for vehicle 4: Charge finished, vehicle still connected
          status = 0
          if int(data['car']) == 1:
            status = 0
          elif int(data['car']) == 2:
            status = 2
          elif int(data['car']) == 3:
            status = 6
          elif int(data['car']) == 4:
            status = 3
          self._dbusservice['/Status'] = status

          #logging
          logging.debug("Wallbox Consumption (/Ac/Power): %s" % (self._dbusservice['/Ac/Power']))
          logging.debug("Wallbox Forward (/Ac/Energy/Forward): %s" % (self._dbusservice['/Ac/Energy/Forward']))
          logging.debug("---")
          
          # increment UpdateIndex - to show that new data is available
          index = self._dbusservice['/UpdateIndex'] + 1  # increment index
          if index > 255:   # maximum value of the index
            index = 0       # overflow from 255 to 0
          self._dbusservice['/UpdateIndex'] = index

          #update lastupdate vars
          self._lastUpdate = time.time()  
       else:
          logging.debug("Wallbox is not available")

    except Exception as e:
       logging.critical('Error at %s', '_update', exc_info=e)
       
    # return true, otherwise add_timeout will be removed from GObject - see docs http://library.isr.ist.utl.pt/docs/pygtk2reference/gobject-functions.html#function-gobject--timeout-add
    return True
 
  def _handlechangedvalue(self, path, value):
    logging.info("someone else updated %s to %s" % (path, value))
    
    if path == '/SetCurrent':
      return self._setGoeChargerValue('amp', value)
    elif path == '/StartStop':
      return self._setGoeChargerValue('alw', value)
    elif path == '/MaxCurrent':
      return self._setGoeChargerValue('ama', value)
    else:
      logging.info("mapping for evcharger path %s does not exist" % (path))
      return False


def main():
  #configure logging
  logging.basicConfig(      format='%(asctime)s,%(msecs)d %(name)s %(levelname)s %(message)s',
                            datefmt='%Y-%m-%d %H:%M:%S',
                            level=logging.INFO,
                            handlers=[
                                logging.FileHandler("%s/current.log" % (os.path.dirname(os.path.realpath(__file__)))),
                                logging.StreamHandler()
                            ])
 
  try:
      logging.info("Start")
  
      from dbus.mainloop.glib import DBusGMainLoop
      # Have a mainloop, so we can send/receive asynchronous calls to and from dbus
      DBusGMainLoop(set_as_default=True)
     
      #formatting 
      _kwh = lambda p, v: (str(round(v, 2)) + 'kWh')
      _a = lambda p, v: (str(round(v, 1)) + 'A')
      _w = lambda p, v: (str(round(v, 1)) + 'W')
      _v = lambda p, v: (str(round(v, 1)) + 'V')
      _degC = lambda p, v: (str(v) + '°C')
      _s = lambda p, v: (str(v) + 's')
     
      #start our main-service
      pvac_output = DbusGoeChargerService(
        servicename='com.victronenergy.evcharger',
        paths={
          '/Ac/Power': {'initial': 0, 'textformat': _w},
          '/Ac/L1/Power': {'initial': 0, 'textformat': _w},
          '/Ac/L2/Power': {'initial': 0, 'textformat': _w},
          '/Ac/L3/Power': {'initial': 0, 'textformat': _w},
          '/Ac/Energy/Forward': {'initial': 0, 'textformat': _kwh},
          '/ChargingTime': {'initial': 0, 'textformat': _s},
          
          '/Ac/Voltage': {'initial': 0, 'textformat': _v},
          '/Current': {'initial': 0, 'textformat': _a},
          '/SetCurrent': {'initial': 0, 'textformat': _a},
          '/MaxCurrent': {'initial': 0, 'textformat': _a},
          '/MCU/Temperature': {'initial': 0, 'textformat': _degC},
          '/StartStop': {'initial': 0, 'textformat': lambda p, v: (str(v))}
        }
        )
     
      logging.info('Connected to dbus, and switching over to gobject.MainLoop() (= event based)')
      mainloop = gobject.MainLoop()
      mainloop.run()            
  except Exception as e:
    logging.critical('Error at %s', 'main', exc_info=e)
if __name__ == "__main__":
  main()

Welche Zeile muss man da ändern ? Oder bin ich komplett auf dem falschen Dampfer ???

VIele Grüße

Ralf

Kurzes Update :

1) die Fehlermeldungen im log mit der Temp sind weg, habe in der Config.ini auf HardwareVersion = 2 umgestellt. Nun wird auch der Charging Status angezeigt. Das scheint also die richtige oder bessere Einstellung für wbec/Heidelberg zu sein

2) das Programm ist nun auch mit der Zusatzzeile self._dbusservice.add_path('/Position', 1) ausführbar, Problem war dass ich noch eine Leerzeile Abstand zum Restcode hatte, die Leerzeile rausgenommen, Programm läuft. Allerdings hat das die Position in der UI nicht geändert, also selbes Problem wie vorher....

Hallo Dierk,

danke dir aber das habe ich auch schon vorher ausprobiert ....geht nicht.

Also nochmal, hier das entsprechende Codesegement

# Create the mandatory objects
    self._dbusservice.add_path('/DeviceInstance', deviceinstance)
    self._dbusservice.add_path('/ProductId', 0xFFFF) # 
    self._dbusservice.add_path('/ProductName', productname)
    self._dbusservice.add_path('/CustomName', productname)    
    if data:
       self._dbusservice.add_path('/FirmwareVersion', int(data['fwv'].replace('.', '')))
       self._dbusservice.add_path('/Serial', data['sse'])
    self._dbusservice.add_path('/HardwareVersion', hardwareVersion)
    self._dbusservice.add_path('/Connected', 1)
    self._dbusservice.add_path('/UpdateIndex', 0)
    self._dbusservice.add_path('/Position', 0)

Auch so wird es wie gehabt im Victron Portal angezeigt. Es ist völlig egal, ob ich da

    self._dbusservice.add_path('/Position', 0)                 ODER
    self._dbusservice.add_path('/Position', 1)

reinschreibe, angezeigt wird es immer als ob es an den kritischen Lasten,also AC_out hängt.

Ich habe auch probiert, per sh.restart in der Telnet/SSH Konsole das Skript neu zu starten und auch den ganzen Cerbo neu zu booten. Bleibt immer gleich falsch angeschlossen in der UI....

Viele Grüße

Ralf

Das will ich auch so haben :=)

Ich hab bei meinem Victron noch die Firmware 2.89 aus Mitte 2022.

Könnte das ein Problem sein ?

Moin moin,

ich hab leider etwas das Gefühl total falsch zu sein. Hab alles wie in der Anleitung gemacht, jedoch wollte schon auf dem PI der Service sich so nicht installieren lassen. Nach dem ich dann noch die Pfade angepasst habe das es mit "/opt/victronenergy/dbus-systemcalc-py/ext/velib_python" klappte.

Bekomme ich nun leider nur noch Fehlermeldungen.

Dec 27 13:23:04 raspberrypi python3[20550]: File "/opt/victronenergy/dbus-systemcalc-py/ext/velib_python/vedbus.py", line 78, in __init__

Dec 27 13:23:04 raspberrypi python3[20550]: self._dbusname = dbus.service.BusName(servicename, self._dbusconn, do_not_queue=True)

Dec 27 13:23:04 raspberrypi python3[20550]: File "/usr/lib/python3/dist-packages/dbus/service.py", line 131, in __new__

Dec 27 13:23:04 raspberrypi python3[20550]: retval = bus.request_name(name, name_flags)

Dec 27 13:23:04 raspberrypi python3[20550]: File "/usr/lib/python3/dist-packages/dbus/bus.py", line 303, in request_name

Dec 27 13:23:04 raspberrypi python3[20550]: 'su', (name, flags))

Dec 27 13:23:04 raspberrypi python3[20550]: File "/usr/lib/python3/dist-packages/dbus/connection.py", line 651, in call_blocking

Dec 27 13:23:04 raspberrypi python3[20550]: message, timeout)

Dec 27 13:23:04 raspberrypi python3[20550]: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Connection ":1.74" is not allow

Dec 27 13:23:04 raspberrypi systemd[1]: victron.service: Succeeded.

Hat jemand eine idee was ich falschgemacht hab?

Besten dank für die Arbeit und beste Grüße

Casi

Hallo,

Ich habe HW Version 4 und bekomme ständig im Log Temperatur Fehlermeldungen. wird denn das Projekt weiter entwickelt, oder gibt's andere Möglichkeiten den Go-e in Venus einzubinden?

Das Problem ist eher:
Ich selbst hab z.b. einen relativ alten goe aus 2018.
Da war die API noch ein klein wenig anders als bei den moderneren und scheint offentsichtlich auch nicht so zu sein wie in der Spezifikation.

Was genau funktioniert denn nicht ?
Charger generell wird angezeigt und ausgelesen, bleibt also nur der Temperaturfehler ?

API V1 im Charger ist aktiviert ?

Normal sollte ein V4 Charger funktionieren sofern du HardwareVersion auf 3 setzt in der Config und im Charger die V1 API aktivierst über die APP.

Das andere Temperaturflag ist an und für sich eingebaut im Code:
https://github.com/vikt0rm/dbus-goecharger/blob/2cc09daa94f465bd1cf37bb8b993eb63245101f5/dbus-goecharger.py#L198

API V1 ist an

das ist der Fehler:

2024-01-16 19:44:11,343 root CRITICAL Error at _update

Traceback (most recent call last):

File "/data/dbus-goecharger/dbus-goecharger.py", line 199, in _update

self._dbusservice['/MCU/Temperature'] = int(data['tma'][0])

KeyError: 'tma'

Kann man den Log ausschalten? denn der schreibt die paar Zeilen 4x pro Sekunde

Hello,

does anyone know, if this VRM integration would also work with KEBA P30 X-Series Wallboxes?

i found the Keba-ModusTCP-Manual here:

https://www.keba.com/download/x/dea7ae6b84/kecontactp30modbustcp_pgen.pdf

Really would like to have this also shown in VRM like you did.

thank you!

anyone, any ideas?!

Or let me ask in a different way:

Does this wallbox-integration work with GO-E only, or could also any other Modbus-Wallbox be integrated by this approach?

gibt es eine Möglichkeit 2 goE Wallboxen zu integrieren?

Theorhetisch gehts, wenn man den Treiber unterschiedlich konfiguriert (IP und Instanznummer) und in zwei unterschiedliche Verzeichnisse unter /data legt.
Ob die Cerbo und das VRM damit umgehen kann ist die Frage.

Vermutlich schon.
Ich denke Victron wird durchaus auch selber Fälle haben wo sie mehrere ihrer eigenen Wallboxen an einer Cerbo haben.

Hallo zusammen,

ich habe letztes Wochenende meine Go-echarger (Hardwareversion 4) angeschlossen, eingrichtet und mit Hilfe des Treibers mit dem Cerbo verbunden.

Die Verbindung scheint auch erstmal zu funktionieren, ich kann die akutelle Ladeleistung sehen, den Ladestrom ebenso und diesen auch ändern. Allerdings kann ich weder über das VRM Portal noch über die Remote Konsle den Modus des Chargers ändern und auch nicht einstellen wo dieser am ESS angeschlossen ist (AC-In oder AC-Out) im VRM Portal erhalte ich eine Fehlermeldung zur Kommunikation, in der Remote Konsole wird die Einstellung nicht übernommen.

Im Treiber an sich habe ich HW Version 3 ausgewählt, weil es 4 dort nicht gibt.

Grüße Jonas

Hello @Dierk Grossfeld ,

I installed the script today and it works fine.The connection to AC-IN is also displayed correctly.

Thank you for your work :-)

I have two questions:

1. is there a way to shrink the view at VRM? I want to show 3 chargers and so i don't want to show so much information and I want changed the name:

Where does the code need to be modified?

2. is there a way also to show the charger at the web-interface/remote-console?

Thank you

I have now registered all 3 chargers. The VRM dashboard packs all 3 into one display.
That's great, as the display doesn't take up much more space than when displaying just one charger

Looks good, but the missing display in the remote console is a pity. I hope there will be an extension from Victron.

Hello @Dierk Grossfeld

thank you for your support

How did you change the mode from manual to automatic.

If I choose automatic, it jumps out of the menu again and it stays at manual.

What does automatic do?

hi, sorry I´m a noob but I have a go-e charger and a multiplus with a cerbo Gx, to install in the cerbo GX witch are the procedures? thanks