Hello,
I just bought a Victron Smartsolar 75/15 that is connected to a small 20w panel. I also have a small 7Ah battery and run a Raspbery Pi Zero 24 hours a day.
The consumption of the raspberry pi is between 0.6W and 1 W and it works correctly connected to the Victron output, but in the application it always shows me "Current 0.0A, Power 0W". Occasionally switches to 1W for a second, but in the history it shows 0Wh consumption.
Is the output too low for the application to show consumption data? Is there any way to make it more sensitive so I can see real consumption data?
