VictronConnect on Raspberry Pi4 - MPPT Infos

Hi,

I just finished installing an MPPT controller (Smartsolar 100/50)and charger on my boat and I've 2 questions to be sure.

1/ I loaded the VictronConnect app for my cell, it's OK. On the other hand, my navigation centrale runs on Raspberry (Pi4).....is there a VictronConnect release for Pi4?

Unfortunately Pi4 is 32 bits and does not (yet) accept Wine, so not this option, maybe another solution except the cell....

2/ On VictronConnect, MPPT Status page: The upper part gives the voltage of the panels and the amperage produced, I understand.

I want to confirm the bottom values, those of the battery bank.

I've the voltage of the park but what exactly is the amperage value which is at "0" while navigation devices are operating on the boat?

Thank you-

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany ♦♦ commented · Apr 05, 2022 at 07:14 AM

Can't help with the Pi. Best bet is to post this as a separate question in the modifications area.

Please post a screen shot of the MPPT stars and the charge/battery settings, thanks.

0 ·

question