Hi,
I just finished installing an MPPT controller (Smartsolar 100/50)and charger on my boat and I've 2 questions to be sure.
1/ I loaded the VictronConnect app for my cell, it's OK. On the other hand, my navigation centrale runs on Raspberry (Pi4).....is there a VictronConnect release for Pi4?
Unfortunately Pi4 is 32 bits and does not (yet) accept Wine, so not this option, maybe another solution except the cell....
2/ On VictronConnect, MPPT Status page: The upper part gives the voltage of the panels and the amperage produced, I understand.
I want to confirm the bottom values, those of the battery bank.
I've the voltage of the park but what exactly is the amperage value which is at "0" while navigation devices are operating on the boat?
Thank you-