This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi
I installed Victron Connect App (latest Version) on my Android and have a connection to my MPPT 75/10 over Bluetooth and over bluetooth it is working fine. I can see the data in vrm.victronenergy.com too. But when I open in my VictronConnect Android App the tab "VRM" is no device listed. Do you see what I'm doing wrong?
are those devices connected via VE.Direct to your GX device? Only then you'll get access to them via the VRM tab in VictronConnect.
Hi @ma_ka
Are you logged in into VRM in VictronConnect?
And did you enable VRM two way communication on the GX device?
See https://www.victronenergy.com/media/pg/VictronConnect_Manual/en/victonconnect-remote--vc-r----configuration-and-monitoring-via-vrm.html
Kind regards,
Thiemo van Engelen
Hi Thiemo and Stefanie
I don't use a GX, I have an MPPT 75/10 with VE. Direct. But I just have seen that I would need a GX that the data are visible in VRM Tab?
Yes, definitely one of the GX devices (CCGX, Venus GX or Cerbo GX). Or a GlobalLink 520, which has built-in 4G LTE-M. That's where you connect your VE.Direct devices to and then the data will be logged via the GX device to VRM.
https://www.victronenergy.de/panel-systems-remote-monitoring
https://www.victronenergy.de/panel-systems-remote-monitoring/globallink-520
When will we get to see it in the VRM tab, Victron?
