Hello -
Working on a new-build project with a Victron Quattro and Cerbo GX, supported by a Northern Lights 240v 6kw generator with NL's "TSC" panel.
The Cerbo is wired to the generator as shown in the schematics, and the Cerbo shows the generator start/stop function, but we have note been able to start the genset via the Cerbo - either in "auto" mode (i.e. when voltage gets low) or just manually. The generator starts fine off the NL TSC panel or the panel at the unit itself.
I haven't been able to find anything from Victron or the support community addressing this, so I'm hoping someone here has some insight.
Much appreciated.