question

marensius-pettersen avatar image
marensius-pettersen asked

HIMOINSA remote start

Hi,

Does anybody have experience with wiring up Himoinsa generator to GX devices?
We have tried the manual (CEM7) and found that ENT4 is for remote start, but not what kind of input / signal it is expecting.

Best regards,
Marensius

cerbo gxGeneratorgen start
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
alex-bush avatar image
alex-bush answered ·

https://www.genpowerusa.com/content/files/MANUAL-HIMOINSA-CEM7-CONTROL-ADVANCED.pdf

Page 84 Fig 3 shows a wiring diagram.

Looks like it wants tying to chassis ground/battery negative using the GX relay as dry contacts.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

sascha-horstkotte avatar image
sascha-horstkotte answered ·

Hi,

did you find a solution to stop the generator remotely, EMS-contact?


Best regards

Sascha

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.