This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello Community,
I have a fresh installation of Venus OS (2.84) on raspberry and successfully added EM24 via RS485 and solar edge SE15K via Morbus TCP successfully.
Now I just saw, that in my VRM dashboard the AC In is N/A. But power of each phase is displayed. But not the sum.
Did I miss any configuration?
Can anyone help me?
Multiplus 2 is already there and will be installed in the next week's.
Best regards,
Dominik
Maybe I need to wait for the Multiplus as stated here?
https://community.victronenergy.com/questions/92988/falsche-einstellung-vom-dashboard.html
Hello John,
Thanks for your reply. This change gives me a green icon but does not show any values.maybe needs some time.
I actually suggest you call it 'Grid' and not 'Generator', even if you're using a genset. Grid gets treated differently in the VRM summaries and Generator misses out on being included in battery charge figures (which is mainly why a genset is used).
And even if you change as you go along, the data is stored in different registers in VRM, so never balances. Even in a Quattro, which can use both names.
Generator will almost certainly be getting it's data from Multi, so you'll need to wait for that. The installer should set all this up for you.
