question

andrie-kotze avatar image
andrie-kotze asked

Bluesolar MPPT 100/30 rev 2 Firmware

I am trying to connect my charge controller to Victron Connect using a ve-direct usb cable but my device is not picked up. I am using windows 10. Drivers installed.

Connected with VE Power setup. Firmware is 1.39. I am trying to upgrade the firmware but I cannot seem to find the correct file. On https://professional.victronenergy.com/downloads/firmware/ I only see v1 and v3. Under v1, I see 3 files v1,vand v3. not one of these files seem to work. Please help

MPPT Controllersfirmware update
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
andrie-kotze avatar image
andrie-kotze answered ·

I've resolved my issue.

Steps followed:

  1. Reinstalled PEAK-System_Driver-Setup with all options selected
  2. Reinstalled VE Power setup
  3. Installed firmware: Solar Charge Controller MPPT 100-30 rev2 v1.59_A04A

This time it loaded successfully on the second attempt.


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

andrie-kotze avatar image
andrie-kotze answered ·

See screenshots

mpptpng.png


prof.png


mpptpng.png (17.4 KiB)
prof.png (53.3 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.