question

pelpel avatar image
pelpel asked

Use of Argo FET battery isolator in Travel Trailer Battery charging

Hello,

planning on using a Argo FET battery isolator to charge my Travel Trailer Batteries. I have used isolators in the past in a camper fine. My question is will I run into problems when I disconnect the trailer from the tow vehicle? At that time not all batteries would be present and I am not sure how the Isolator will behave when it senses no batteries on one of the charge posts?

thank you,

Peter

battery charging
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
David Foret (Victron Energy Staff) avatar image
David Foret (Victron Energy Staff) answered ·

The Argo Fet does not sense a battery presence at its terminals, so there is no problem by disconnecting one battery from the 2/3 outputs, the connected battery will receive full charge

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic