Can the two screws that hold the BMV circuit board to the shunt be used for Wake Speed sense wires without compromising the ability to measure current?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Can the two screws that hold the BMV circuit board to the shunt be used for Wake Speed sense wires without compromising the ability to measure current?
The two screws holding the PCBA to the shunt are mounting screws for the PCBA, do not connect anything to those screws - they are not consumer connection points.
Additional resources still need to be added for this topic
26 People are following this question.