question

Kevin avatar image
Kevin asked

BMV 712 shunt for wake speed sense wires

Can the two screws that hold the BMV circuit board to the shunt be used for Wake Speed sense wires without compromising the ability to measure current?

installation
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jwfrary avatar image jwfrary commented ·
@Kevin did you get an answer to this, I'm thinking of doing this. But perhaps the victron gear can pick the wakespeed up as an alternator now anyway!?
0 Likes 0 ·
Show more comments
1 Answer
Justin Cook avatar image
Justin Cook answered ·

The two screws holding the PCBA to the shunt are mounting screws for the PCBA, do not connect anything to those screws - they are not consumer connection points.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic