VRM bug displaying voltage units as percent (%)

When viewing the history graph on VRM, if you mouseover any of the points it shows the values for that data point. When displaying Battery Voltage Range it shows voltage with % units. This is confusing and incorrect, it should show V for volts. It would also be nice if it displayed 2 decimal places as voltage information as a whole number is not very useful.

See below, it shows 25% - 26% - This should be 25V - 26V (and even better would be 2-decimals)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany ♦♦ commented · Mar 22, 2022 at 05:51 AM

tried to replicate, but I didn't get the same lines in the mouse over. No voltage range for instance. I think you're showing this from the dashboard history? Maybe it depends on what equipment is installed.

0 ·

hummingbear kevgermany ♦♦ commented · Mar 22, 2022 at 08:06 PM

Yes exactly, this is from the dashboard history.

I think you're onto something regarding the equipment. The install for this bug only has a SmartShunt. My other installs have more equipment and do not have this bug (or same display).

0 ·

kevgermany ♦♦ hummingbear commented · Mar 23, 2022 at 06:03 AM

They've released a lot of enhancements into VRM recently. Like the dark mode you're using. It'll be reported as a bug, might take a while to fix.

0 ·

hummingbear kevgermany ♦♦ commented · Mar 23, 2022 at 04:40 PM

I don't mind however long it takes, just want to make sure it gets added to a list somewhere. You're saying this will be documented as a bug? Love all the new features, especially dark mode. Thanks!

0 ·

Show more comments