question

Tommy avatar image
Tommy asked

Cerbo GX monitor chassis battery and display in VRM?

My chassis battery is correctly monitored from my 712 and I can see the different voltages when I connect to it via bluetooth. It is configured in the remote console to be visible, yet I can't see it in VRM. How do I fix this?

Thanks

Tom

cerbo gx
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@tommyg

Primary or secondary battery in the system?

My second battery appears at the bottom of the dashboard page and in widgets but am using two monitors.

I am sure you did this already. To get that you go to system setup- battery measurements-visible.

screenshot-20220321-081725.jpg


screenshot-20220321-081725.jpg (89.6 KiB)
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·
If it is the secondary battery, I think you can only get voltage on the advanced page widgets. As the bmv only monitors voltage for the second one.
0 Likes 0 ·
Show more comments