Hello,
i have a problem with AC-THOR an Victron ESS, it is nice to see that MYPV and Victron are know of each other. But they do not merge data good ...
The communication should be more intelligent ....
This Video shows AC-THOR with regulation value of -50 Watt:
https://youtu.be/PrnGchvTrxs
This Video shows AC-THOR with regulation value of -200 Watt:
https://youtu.be/KSET7ea-IaA
In the first Video you see that AC-THOR is grap the hole power and the Batterie is discharging ..
in the second Video you see that AC-THOR is reacting more confidential ...
But i have a big problem wit VICTRON !!! You say we support myPV AC-THOR, we have a nice Document for installation.
But in fact you do nothing !
There is no Modbus Register in which you can get the calculated Value for how much engery AC-THOR should grab. You only give them the normal feed in register.
and in fact .. the AC-THOR grabbing the energy and prevent the Battery to load ...
AC-THOR needs: PV - CONSUMPTION - (possible) BATTERY LOAD
May in your nice clean world that would play good, but if you have a normal home then the energy consumption ist jumping from second to second by more than 1000 Watt's ...
>>>
Please remove your Support Document, because you do not support the AC-THOR !
I am very angry about this !
<<<
See below ... may some addition to the document would be OK ....