This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Image CaptionMultiplus 12/3000/120 state always reading initializing on VictronConnect App when unit is on (inverting, charging, on) when it is off the state reads off. This seems to have only started since updated firmware to v459. Connected via mk3 and reads correctly in VIctronConnect - all settings are good in configure with no assistant installed.
Did you carry out the full firmware upgrade process? Or was this an automatic update?
It's quite a complex process. Guessing you missed a step or didn't quite get one right.
This might help
https://www.victronenergy.com/media/pg/VE.Bus_Configuration_Guide/en/firmware-updates.html
The last answer goes to a dead link. Not helpful. Is victron abandoning it's end users? I see lots of questions but no answers. Very sad.
It's impossible to keep links up to date in old threads. But if you need help, please post a question in a separate topic so we can try and help with up to date information.
