question

jistjad avatar image
jistjad asked

Non Isolated B2B Charger Installation- Can it be wired direct to the battery instead of the alternator?

Hello,


Hoping someone may be able to help.


I have a non isolated b2b charger that I am hoping to install shortly. My plan was to connect both positives, one from the main battery and one from the leisure battery and then to feed the negative wire to ground via the phoenix distributer. I have looked at the installation guide and note that the positive wire should be connected to the alternator not the starter battery. Will the way I was planning to install it still work? Many thanks in advance.

battery charging
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
David avatar image
David answered ·

connect to the Starter +ve as you are thinking. 100% ok to do.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jistjad avatar image jistjad commented ·
Thanks Wildebus :) and grounding it through the distributor is okay also?
0 Likes 0 ·
Show more comments