question

Hannes Swart avatar image
Hannes Swart asked

Firmware Update

I want to upgrade to the new firmware, was just wondering if it would reset all my values in the system or will they stay unchanged?

firmware update
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Stefanie (Victron Energy Staff) avatar image Stefanie (Victron Energy Staff) ♦♦ commented ·

@Hannes Swart,

Which device do you want to update the firmware on?

0 Likes 0 ·
Hannes Swart avatar image Hannes Swart Stefanie (Victron Energy Staff) ♦♦ commented ·

Quattro 48/15000/200-2x100 and SmartSolar charger VE.Can 150/100


0 Likes 0 ·
1 Answer
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

@Hannes Swart,

When updating the firmware on your SmartSolar VE.Can, the settings are retained. With the Quattro you have to save the settings before the firmware update and restore them after the firmware update because the unit will be reset during firmware update.

6 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Hannes Swart avatar image Hannes Swart commented ·
So I have downloaded the remote config files to my computer using Remote VEConfigure via VRM, my question is can I then just upload the file again to the system after the upgrade and can I do this while the system is running as I am off grid?

Sorry I'm new to this :-(

0 Likes 0 ·
Show more comments