question

roachmon avatar image
roachmon asked

Reactivate Bluetooth for Smart Lithium Battery

Hey there,

I have a Smart Lithium Battery that has stopped communicating via bluetooth. The battery is holding a charge, but is unable to communicate. I'm not exactly sure what the problem with the battery is, maybe just the bluetooth got deactivated, or something larger. It is wired in parrallel with 2 other batteries (600ah total) to the Lynx Distributor, and is causing the VEbus BMS to switch off the DC Battery Protect.


I have replaced the battery with a charged and balanced one, so this van is up and running again. I would like to get this malfunctioning battery back in action. Is there a way to reactivate the bluetooth and/or reset this battery?

Thanks for your time!

Lithium BatteryBMSBluetooth
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul B avatar image
Paul B answered ·

Try this it may help https://www.victronenergy.com/media/pg/Lithium_Battery_Smart/en/appendix.html#UUID-9312e210-9b10-cb0f-31b0-dde4eb8e42f6).


1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

roachmon avatar image roachmon commented ·
This did reactivate the microcontroller! battery is back in action. I'm just trying to figure out why it happened in the first place. Thanks!
0 Likes 0 ·