Ever since upgrading the Multiplus II to 492 and Venus OS to 2.82 (coming from 2.74), I have noticed that the AC loads are not always showing the correct values.
I often see AC load on phase 1 going to 0W.
It looks like it is cause by delays in reading out consumption values from either the Multiplus or the Grid meter. My battery cells are not well matches, so the BMS will start to constantly decrease and then again increase max charge current. So the Multiplus is constantly dropping and increasing the charge power quite a lot. Seems that, when u sudden increase or decrease occurs, it takes some time for the GX device to correctly recalculate the AC load.
Not sure if this is impacting anything other than the displayed statistics.
Anyone have any idea why this might be happening?
I have made a gif showing the issue. Note that power consumption is actually stable, so the AC load values are definitely incorrect.