This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi team,
I have a easy solar unit in my engine room where I have 2 shunts for 2 battery banks. In my wheelhouse there is a Cerbo.
I connected the Cerbo to the 2 shunts by VE-direct 2x
The Cerbo to the easy solar by VE-bus with a ethernet kabel.
Now I don't get the information from the shunt into the Easy solar. Is the information not sent from the Cerbo to the easy solar?
I only found 1 VE-direct on the Easy solar so this is why I run the cable to the Cerbo.
Hi @Jordy
The VE.Direct port on the Easy is for connecting the onboard mppt to the Cerbo. So you'll need that in addition to the VE.Bus cable. The Cerbo has 3x VE.Direct ports, so you won't need a usb adaptor.
In a simple system the Cerbo functions mainly as a data collector. It can communicate data to the Easy if it's required, and commonly this would be used to implement DVCC.. https://www.victronenergy.com/media/pg/Cerbo_GX/en/dvcc---distributed-voltage-and-current-control.html
You don't really give enough detail as to what you want, so it's hard to help you achieve it. Come back though.
My VE.direct is now connected, like you say on the Cerbo (2 shunts) one VE.direct still free. But the information from the shunt is not showing up at the easy solar color display. The Cerbo has a VE.bus cable to the Easy solar color display (VE.bus input). So I am wondering if I need to run a other cable type or do a setting. The Easy solar is nearby the Shunt so maybe even with the BT?
Ok, the plot thickens. You have an Easy with a 'colour display'? If so (a CCGX), you can't add a Cerbo. Only one GX device per system. Or you'd disconnect the CCGX and use the Cerbo.
You're also going to face the issue of having two battery monitors into one GX. One of the shunts might have to be configured as an Ammeter or left standalone. If you're using both batt banks into the Easy, then ideally one shunt on a common earth.
Do you have some sort of wiring diagram, this is getting harder for us?
Edit/: I missed Matthias' and Kevin's answers.
You can't have two GX devices in one system. You have to connect everything to the Cerbo OR to the CCGX inside the EasySolar.
Of you want to use the Cerbo GX you can't use the CCGX (disconnect everything from the CCGX).
Some models of the Easy Solar include it's own GX device (a CCGX). Cerbo is also a GX device and the two will not talk to each other and can not both be used in the same system if you want all components to integrate. You should probably disconnect the CCGX inside the Easy Solar and connect the inverter to Cerbo via VE.Bus and the MPPT controller to Cerbo via a VE.Direct cable.
Thanks for the info, it sounds strange that the information is not possible to share. So its also not possible to pot 2 Cerbo units into 1 system?
It works at the moment for the information of the inverter but just the shunt is not showing.
The MultiPlus and MPPT are shown on the CCGX because they are internally connected to it.
The shunt is not shown because you connected it to the Cerbo.
