question

Greg avatar image
Greg asked

BSC 12/25 not charging

My battery charger started to charge 6 minutes after I turned on 240volts.

Voltage charge was13.48 volts current 25 amp

Current dropped to 17 amp very quickly then voltage dropped to 13.29 v current 0.

Voltage now 13.24 v current 0

Smart shunt shows 62% state of charge.

Battery charger has green light on and orange light flashing slowly.

Battery charger has been working well up to now.

How do I fix problem?

Regards Greg

charger
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·


@Greg

If there are no errors in Victron connect for the BSC it is possible that the shunt is off on SOC. You would need to eliminate that as an issue.

The slow blinking means it is in absorption?

How is it set?

screenshot-20220221-114153.jpg



screenshot-20220221-114153.jpg (117.6 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Greg avatar image Greg commented ·
Thank you for reply, SOC on shunt reading 62%.

Regards Greg

0 Likes 0 ·

Related Resources

Chargers.

Additional resources still need to be added for this topic