question

kiwi35 avatar image
kiwi35 asked

Adding a second multiplus-II to a current setup.

Hello,

Currently have a Multiplus-II 48/5000/70 GX, I would like to know how to add a second one (no a GX model). Eg how to setup this (except Ve-bus, DC, AC...) : eg which one I switch on and how to make both of them correctly?

Regards

Multiplus-II
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Warwick Bruce Chapman avatar image
Warwick Bruce Chapman answered ·

Watch what Matthias suggested and then use the VictronConnect method.

Also strongly suggest you get a GX device.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

marekp avatar image marekp commented ·
@Warwick Bruce Chapman

Author has a GX device inside of his MP-II 48/5000 GX and this one is enough for his system.

0 Likes 0 ·
Warwick Bruce Chapman avatar image Warwick Bruce Chapman marekp commented ·
Second class answerer has cemented his second class status. My bad.
0 Likes 0 ·