question

solartech12 avatar image
solartech12 asked

what are 3 programmable relays on Quattro 10KVA

I want to know what are three relays on the Quattro 10KVA - 140A version . I have identified K1 and K2 as 2 relays but can anyone tell me which one is the third one since the manual says 3 relays are available that can be programmed to any logic.


web-capture-16-2-2022-173250.jpeg

Relayquattro 10kva
web-capture-16-2-2022-173250.jpeg (208.5 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

Should be in the top right corner of the PCB. The "primary programmable relay" or VS (virtual switch.

In the manual appendix A the I.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

solartech12 avatar image solartech12 commented ·

thanks I found it in the manual but it doesnt say whether it is programmable too as the case for K1 and K2 . also if this is the primary one then can I select it inside Veconfig assistant to trigger external relay based on some condition of battery ?screenshot-2022-02-16-181616.png

screenshot-2022-02-16-181440.png

0 Likes 0 ·
screenshot-2022-02-16-181440.png (70.5 KiB)
screenshot-2022-02-16-181616.png (11.8 KiB)
Show more comments

Related Resources

Additional resources still need to be added for this topic