This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi all,
just a short announce: v2.83 has been released officially. Thank you for the testing and feedback.
Changes are on Victron Professional; no changes and exactly the same as also announced here: https://community.victronenergy.com/questions/120577/venus-os-v2831-available-for-testing.html..
With v2.83 out, all issues that we are familiar with that started with the (big) v2.80 release are now solved.
All the best, Matthijs
Big problems here with 2.83 and 2.84
Grid Setpoint isn't met anymore.
In my setting (Grid setpoint -20, total of all phases) it is at approx -180 all the time (selling to grid)
upon switching to individual phase, it goes to approx +180 (buying from grid)
Even setting it to +80 doesn't change this when on total of all phases.
please @mvader (Victron Energy) could anyone look at this. Feel free to try and adjust.
ID 58337
Problem started tonight - maybe with auto update to 2.84 (?)
Got back to 2.83 but problem still here.
After a reboot its ok some minutes but then it gets to -180 again.
System: 6x MP II 5000, 5x MPPT, 1x Fronius Symo, 45kwh BYD LVL - all firmwares on latest.
Unfortunately can't go back to 2.73 (which was fine) as i already was on 2.84
Grid Set point working fine here on 2.84 but just on a single MP II
