question

bluejeans avatar image
bluejeans asked

Strange GUI Mods issue

I am my own worst enemy. I updated my RPi to 2.8. I installed GUI mods, and connected Ruuvi sensors. All went easy. Then in a crappy wifi situation on Remote Console, I clicked multiple times on the "A/C in" tile to see the secondary info, as nothing was happening when I clicked. Then it appeared all of the clicks executed at once. And what ever that combo of clicks was, deleted the "A/C in" tile altogether. I have been through every combo of settings in the GUI, I can't get the tile back. Any help?


273647307-7547096465304143-155463335315229338-n.jpg


Venus OSRaspberry Pi
273647307-7547096465304143-155463335315229338-n.jpg (90.9 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Kevin Windrem avatar image
Kevin Windrem answered ·

The AC input tile is visible if the detected inverter is a Multi or Quatro (a VE.Bus inverter/charger). No clicks you do in the GUI would make that tile disappear.

The Multi tile is also showing a condition where there is no inverter detected.

I'd reboot the GX device and see if things come back. If not, check to see of there is a Multi/Quatro listed in the device list. If not, you may need to reboot the Multi/Quatro.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bluejeans avatar image bluejeans commented ·
The tile was there and functioning, and now its not, after the multiple click episode. The RPi has been rebooted. No change. A multi is not connected yet... That is my next purchase so that is why you see what you see. I would like the tile back before I buy the Multi
0 Likes 0 ·
Show more comments